3 WAYS TO WIRE YOUR FUELTECH STANDALONE ECU

Thank you for watching,

If you learned anything from this video.

Please consider following for future content!

[MrRollingdtime]

Also has outputs for head lights and tail lights along with turn signals just about anything you need as long as there's an output left for it. I'm using the FT550 with a rywire harness in my turbo b-series. Found a stock OEM female ecu plugend then crimped and solid all my own wires. Took a little time but came out just right.

[allmotorpete]

I used the Fuel Tech 4cyl harness and just crimped my Honda connectors on it.

[josuegonzalez]

Was good seeing you guys at IFO and thanks for the ft550🤟🏾

[stevemartinez]

So just to get this right Mike, I can buy the ft450 with the diy harness and I can chop off all my stock plugs and wire those to the new harness is that kinda what I'm getting

[unknownbikes]

Let's do a J series FT600 in a 6 speed TL S type. I'm in Vegas own the FT600, A and B harness non terminated, FT 8 switch panel. 2 nano O2 sensors 1 for each bank. And most, if not all connectors and sensors. The TL is gutted and easy to work on. J swap Jason.

[braappaholic]

How much is that harness for the ft450

[sycboyspi]

I changed the fueltech out on my s2k ap1 k24 swapped for the Kpro V4 with Bluetooth, way better than fueltech

[nitronick]

Does anyone make a harness that lets me use my existing rywire engine harness but just lets me plug that and the fuel tech together for b series like you showed for the k series? Until i rewire the entire car from scratch for standalone?

[phillip-tuof]

i want to use a 450 with a toyota starlet, 4AGE black top 20 valve. looking for harness. any suggestions? circuti rcaing.

[Drizzy]

I’m interested In the harness that you showed first. Got a price and availability?

[aerohithifi]

I am confused about existing Honda fusebox and relays. As an example - the radiator fan relay wire goes to the fusebox right? Where would i connect my FT ecu wire for that? (btw this is for Honda Fit swap)

[BoostedRoads]

Do you know anything about megasquirt on a honda

[sappk]

I need a jumper harness for my Fueltech ft550 on a sw20 K Swap MR2. The harness will have to be a tad bit longer to reach my dash. Can you accommodate this? I’m currently running K Pro on a K24a2

[Omar-]

Anyone know where I can find a ft450 harness plug and play for a k24?

[jarrettlabate]

What do I need to run 8 injectors 4 on pump gas and 4 on e85 separate fuel systems k24 ft550

[zachbenson]

Whats the link for the wirewhere 450 harness?

[chormoua]

For a mr2 would the kseries patch harness reach the cluster area

[remytremblay]

Is it posible to make adapter OBD1 to fueltech . I already have a race spec obd1 engine harness and PDM siwtch panel.

[angelluispacheco]

Hi do you have a fueltech harness plug-and-play for j32 Type-S ?

[seekerofgrace]

How much is that junper to use with stock k20 harness?
Couldn’t find it on website
Thanks