D&A easy way to lay 45 deg herring bone monoblocks

Level 4 horticulture course @ D&A college class 4A the lecturers way!

[hannahkennedy]

Overlay past boarder ping chalk line all way = 1 cut line and much faster

[alkasoli]

In Dutch, you won't believe there's a contest to remove paving tiles and changing it to a garden... upto now they have replaced about 11 million tiles..it prevents flooding .. natural rain water harvesting..cools the urban environment
Isn't it wonderful?? Free soil should be given importance...I was sad when my father changed my small garden to an area full of tiles

[markymark]

That is not how you set heeonbone out. Your cuts are to small for one. You should use aa straight edge to space your blocks from your border to make sure your cuts are big enough. Also you don't need the strongline you should come off your border if it's straight no need for line.

[NotoriousSquigTV]

Should use a straight edge or screed rail up the soldier course to allow for discrepancies between the edgings, something small enough to allow 2 cuts from one block while also having a decent sized cut.

[samsen]

Nice and simple but what about the all 3 other corner edges? Would be nice to finish that or add another video clip to show how to go about that critical section.

[iamadog]

you need to show how it's centered, so that the same size cuts are used on either side and top and bottom, otherwise that video was a waste of time and effort

[omarrojas]

That's nice, but you won't get even cuts on both sides, if you noticed where you started you have a full brick and in the other side you will have to me a cut.

[jamesdykstra]

I turn my boarder round to single band, over lay, then mark my cut, right the way up the street. This is the cowboy way on the video

[michaeleyerly]

How do you do the corner measurement? Do you cut into the brick? Thanks

[bigcartoonyIIV]

what happens for the cuts? will the be tiny angles throughout the process?

[wespaiderman]

Antes de todo se debió aver compactado...muy bien la coramain...para evitar el movimiento de los ladrillos con el paso del tiempo y el peso de los k no sirve de nada Aser el trabajo bien en lo arquitectónico ....y en calidad será un desastre tendrían k volver aponer de nuevo todo ...pero si está .bien el diseño

[The_Journey_Man]

Lol I wouldn’t like to be the Labourer who has to do all of those cuts though

[DonGordito]

How or where did you get the 140mm measurement? Thanks

[honestychampmilland]

Do not do it that way if you're looking for symmetrical edges

[jamesdykstra]

Now you need to learn how to screed because that sands all over the place.

[markbradley]

My experience of cutting in on a herring bone like that is little fiddly cuts that aren't strong even after sand and whack. End result looks smart though

[lipeamos]

laid this out on CAD and its perfect. you can get 4 cut pieces out of 1 brick. Awesome!

[jayweezy]

Naa you'd get a 45 angle and lay your first block closer to the straight edge and then run a sthil all the way up so you don't have 1 million little triangle cuts which are gunna rattle in about 3 weeks ...

[stevetuckey]

This hurts my eyes, I had to stop watching