Many Do Not Know How To Weld Aluminum, Cheap and Fast

#welding #automotive
Many do not know how to weld aluminum, cheap and fast
many don't know how to weld aluminum other than tig welding, there are many ways to weld aluminum, one of which is in this video

[GuestInvitado-gdbi]

These repairs have been around since oxyacetylene was integrated into the auto repair shop. It' s called gas welding. I do it all the time. Two thumbs up. 👍👍

[travismailsa]

From what i was taught when i was a kid, this was called brazing to me when i was to repair/fill or join weak metals?

[johnbelwell]

For a flywheel dust cap fix, this weld is very VERY good! A little grinding and it'll be like new. Whoever says the opposite must be one of those guys from the bad clan of welders who are always alarmists, criticize beginners and think that if you weld a piece of crap you have around you're useless if it doesn't have the integrity of a nuclear reactor.

[firefox]

That turned out much better than I thought it would for cast aluminum. Well done

[cornwallavr]

That was amazing. Not so much the gas welding but the use of the steel rod to give feedback to when the aluminum goes liquid, it's perfect. Makes all the difference, thanks.

[MiwkaTMagic]

Tig сварщик вышел из чата :-) Глазам больно.

[lorenzoghinelli]

Man, if you see a flame not shaped and rough like that it means that you torch’s tip has to be replaced! ;) And by the way: this way of welding alluminum has not mechanical strength!

[jamalahmad]

لم اعرف نوع او رقم السلك المستخدم في البدايه نرجو الاجابه
شكرا للعمل الجيد

[ИгорьНедбайло-ло]

Диву даёшься! Наверно Индия! Аргона и всяких плюшек, станков и т.п. нет, А Сварка есть. Значит можно, если нужно! Лайк!

[pierrelombaard]

A welder once used arc welding for a enjin topcover for me
It was perfect

[Alec_Bike]

Good job man, i'm a time traveller and a blacksmith from 1350 and i never saw a such beautiful welding. Where do you install it on your horse... what happened ?

[victoryfirst]

What type of rod are you using fella ???

[pandawaaluminium]

Cara las aluminium makasih ilmunya mas.salam dari pandawa aluminium

[فهمىابودهب]

راءع ولحام جميل جدا جدا هل تستخدم مساعد لحام

[freefree]

После такого глобального перегрева детали, её повести должно, думаю что посадочные отверстия могут не сойтись.

[garyyorke]

Well I guess as it's only a cover a full strength weld is not required, however I'm not so sure just giving it a quick brush covers the fact it should be spotlessly clean before attempting to weld or in this case solder a huge chunk of material over a split .

[carloslopezguevara]

Y q electrodo estas usando y que tipo de soplete es? Ósea que gas usas en el soplete

[elmerfudd]

Do you fill it up with water to verify no leaks or can you fill it with water to check for leaks or should you use oil?

[Заправду-мд]

Это жесть. С таким сварщиком врагов не надо.

[MrMoto]

I was taught to heat the material up to 700C then let the rod melt into the weld. The alloy melting temp is 1200C. The melted rod will then adhere to the alloy on a molecular level providing a good, strong bond. What he shows is equivalent to spak filler. Not all rods are born equal and youtube Project Farm has tested 3 alum rod brands that work.