If this man didn't make video's about servo's i would have cried buckets 😂😅 Thanks alot!
edkcustoms
Good stuff, Tim. I will admit, as soon as I click play on one of your videos, I try and say, "Hi, this is Tim!" at the same time you do. I'm getting pretty good at it. My moms proud....
coasterbp
Mate, this is very informative. I was having difficulties to get the idea behind the drives and how they work. Your thorough explanation helped a lot to put the bricks in place. 🙂 Thank you.
tctn
Thanks Tim these types of videos are really good.
aussiegruber
Hey Tim, can you make a video on how to program these servo motors on Studio/RS Logix 5000? That would be awesome
zachquertermous
This one really helps me like all the other videos....coz im taking motion controls courses in rockwell automation
jaikumar
Hello Tim, How to wiring Terminal block module to PLC, I use drive Delta ASD B3 L
ปักษาวายุ-มฐ
AN OTHER A M A Z I N G VIDEO that saves my A****😂!!!!Thank you for all your efforts in making these videos!!!Awesome!!! I need to control 1 of those AC servo motor with a Raspberry pi and by just listening I think I have a clue 😅: feed an analog signal(0-10V as you are doing in here) to the motor; I'm planning to generate the signal with the RPi PMW and have some sort of hardware that would eventually output a range of 0-10V signal; and that's it; I would add few buttons/switches for the enable, reset and EmergencySwitch. I'm planning all this if the actual driver/controller supports DIO and AIO a the same time 😬😬🤞🏼🤞🏼thank you for the inspiration
azelbane
Hi Tim. a video about the different types of servo motion control would be cool if you ever find the time. like stand alone servos, bus based, open architecture, ect.
justinpuzak
i have several servo motors and some drivers, all salvaged. can you do a how to connect up and test runn. like this vid, but the analog signal thing you use i dont have will need a nother way to give that signal
manusholm
Top. Do you have a tutorial on configering limit switches and homing scenario's
bastablet
Thanks tim 👍 your a great knowledgeable professor
electricaltyler
How do you connect voltage controller to servo ? which 2 pins ?
color
How to activate R brake of kinetix5500 in run mode not just only stop mode ?
vorapobautomation
Hi Tim, Just started watching your videos great info . If it’s possible can you do a video on finding servo motor ratings with out any motor name plate info on it . New to CNC machines, trying to retro fit CNC given to me . Any info would be appreciated
davestake
lol that was really cool! Can you please more videos about Servo motors? I have never used servo motors in my life and I have a big project coming up where I need to position a wood sawing blade on the right place. Can you make a video of how to use the positioning mode?
ivandimitrov
Hi sir, please tell me i have kinetix 300 I have to convert it to kinetix 5100. The PLC is Micrologics 1400. How to convert this please help me
manmohanpathak
Tim, is there a difference between a "servo" and an "indexing servo". I want a servo to do something once it sees the Photo-Eye and gets enough encoder pulses. Then based on some inputs for start, and dwell, it cycles and goes back to a zero position. Thanks for you help.
personal
Hi Tim1! thanks of your great video. can you make a video about more details of the motion controller? saw in your video that you are using galil motion controller? I am still confusing of the galil motion control connection and working principal. hope you could help
tigerwee
Hello Tim, good day I wanted to know the serial number of your servomotor
