Characteristics of operational amplifier in tamil

Ideal characters of an Operation Amplifier
1. Open Loop gain
Open loop gain is the gain of the Op Amp without a positive or negative feedback. An ideal OP Amp should have an infinite open loop gain but typically it range between 20,000 and 2, 00000.

2.Input impedance
It is the ratio of the input voltage to input current. It should be infinite without any leakage of current from the supply to the inputs. But there will be a few Pico ampere current leakages in most Op Amps.

3. Output impedance
The ideal Op Amp should have zero output impedance without any internal resistance. So that it can supply full current to the load connected to the output.

4. Band width
The ideal Op Amp should have an infinite frequency response so that it can amplify any frequency from DC signals to the highest AC frequencies. But most Op Amps have limited bandwidth.

5. Offset
The output of the Op Amp should be zero when the voltage difference between the inputs is zero. But in most Op Amps, the output will not be zero when off but there will be a minute voltage from it.

Thank You for watching

[sudhagarsundar]

Thank u sir. நீங்கள் எங்கள் (EEE)பொக்கிஷம்

[stalinsubbiah]

Sir, put video on basics of Programmable Logic Controller

[தமிழன்டா_]

Sir oru doubt. Pls solve.

New gi chemical earth pipe pottaum N&E VALUE 10v to13v varuthu. Enna problema irukum sir😢😢😢

[saakash]

Sir the previous video la ideal characteristics input impedance low and output impedance high solli irunthinga ana intha video la input infinity and ourtput high nu solluringa which one is correct sir 🤔