Window door alarm sensor door entry alarm

How to use the remote door sensor alarm?
1.Remove the battery strip before use.
2.Test the alarm sensor with remote.
Long press the ARM key on the remote, you will hear a long beep from the alarm. Please separate the magnet
bar 2cm more from the alarm, it will activate with sound. When closed, the window alarm will be disactivated then.
3. Mount the sensor.
Clean the surfaces where you'll install the sensor's two halves, so the adhesive works better.
Place the main sensor first, holding for around 30seconds to ensure a strong adhesive bond.
Place the magnet on the surface opposite the sensor. If you're mounting on a door, make sure there's enough
room for the door to move freely without bumping the door sensor.

Tips: Before you can install the door magnet door alarm sensor, it's a good idea to test it firstly, because the
remote door alarm is really hard to move after installing them on the door or window, so this can save a lot of
trouble later in the process.