etrailer | Review of the TeraPump Manual Potable Water Transfer Pump for 55 Gallon Drums

Click for more info and reviews of this TeraPump Fuel Transfer Pump:
Check out some similar Fuel Transfer Pump options:

Don’t forget to subscribe!


Now, I do wanna point out that this is not compatible with hot water, acetone, benzene, creosol, ethyl, phenol, methyl ethyl, concentrated caustic soda liquid, nitric acid, hydrochloric acid, or sulfuric acid. The manual piston-action pump is easy to use. I have it tightened right now, but you're just going to tighten the release cap on the top of the pump to create a vacuum for liquid transfer, and then just loosen the cap to stop the transfer. I'm gonna go ahead and remove this discharge hose real quick from its holster. The drum buttress adapter that you see right here is going to be easy to grip, and that's going to make it very simple for you to tighten up or loosen.

The two inch NPS bung adapter is going to fit your 55 gallon drum bungholes. Now, the intake tube that we have right here is going to measure right at about a little over 32 inches, about 32 1/4 inches long, and the diameter is right at 1 5/16 inches, and the head of the pump, so where this is going to be sitting on your drum all the way to the top of our pump, we're gonna be sitting right at about 12 inches tall, and the overall width is about three inches wide. Our discharge hose, the total length is gonna be right at about 48 inches long, and this is going to transfer up to 5.5 gallons per minute. And again, you saw this as we began our time together, this has a ring here, a little holster to hold our discharge hose when it's not in use, so you're not gonna have to worry about that hose flopping around all over the place. Now, a nice feature of this pump is that it does have a detachable intake pipe, so when you are done using this, all you have to do is loosen up the segments.

And we're gonna go ahead and loosen up this one, let me put this down here real quick. And what this is going to do for you is make this more compact, so you can easily store this. So you're gonna have two segments here of your intake pipe, and then you can just put this together and that's going to fit in a lot smaller space for you when you are not using this. So that's a great feature, and then when you're ready to use this, it's going to be very easy to connect these segments and tighten them up. We'll have it done in no time at all as you can see, and you will be ready to go.

So again, this is going to give you a lot of flexibility for storage, and it's a pump that is going to be good for various types of liquids to transfer from one place to another. Well, that's gonna conclude our look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..