How To Replace Hydraulic Lifters on a Chevy 350 V8

How To Replace Lifters on a pushrod v8 v6 5.0 5.7 vortec small block chevy chevrolet . Sbc sbf How To Adjust Lifters Rocker Arms . How to build an engine . How to adjust small block chevy valves mechanic shop garage . Rocker arms . Collapsed lifter sludge ticking noise roller lifters crane comp cams dodge ford chrysler buick corvette bmw camaro mustang . How To Adjust Hydraulic Lifters On a Small Block Chevy Valve Lash Adjustment

********Get your klowny1969 Shirts and Apparel here:

[malcolmeatman-goode]

I would just like to mention that this video is very informative. When it comes to adjusting preload gents there is a much easier way to do it.

1). Set all your lifters, rockers, and pushrods.
2). Tighten the all valves until you can’t spin the pushrod anymore.
3). Rotate your crank 90 degrees (there are valves that will loosen) adjust as necessary until the push rod doesn’t spin.
4). Repeat the rotation until there are no loosening valves upon rotation (this usually takes 5-10 rotations)
5). Final pass is 3/4 turn to set the preload.

The adjustment process for all 16 will take less than 10 mins doing it this way and the vehicle will fire right up no issue every time.

[jos]

Glad you've been documenting all this stuff and taking the time to explain. Videos like this really are priceless for do-it-yourselfers.

[heathhinton]

I wish every video was as good as this one, very nice on the explaining and going step by step. Also extra points for having a person operate the camera so they can get right in on the action. Very good vid.

[oakleaves]

Another great video. Surprising how helpful these have been with my 80 Camaro.

[SteveRobReviews]

Man you do good work - clean and precise. Thanks

[SuburbanCamping]

Thanks for a very concise video. I am trying to better understand my lifter tick issue in my 5.3L engine and your video clearly shows the parts and how they work.

[novaguy]

Thanks again for another great instructional video In the process of doing same on my 350SBC and its good to see your video to ensure I am doing it the same way and that I am on the same page as to how this goes Keep on keeping it real man Thanks again and hope you keep posting your videos they help lots of people for sure!!!!

[ericjohnson]

I love my Milwaukee ratchet too. It is a great tool.

[jayyoutube]

I got a s10 with a 4.3.. I put new heads on it (smoke and loss of power) the lifters and valve terrain look pretty much the same.... Good video, thank you

[arodderz]

When installing the new hydraulic roller lifters into my sbc, does it matter which side the small oil holes are facing. I know the flat spots only go one way, but depending how it goes on determines of the hole faces the distributor or the timing chain?

[karlgreat]

Hopefully your drunk neighbor doesn’t come in to your shop shoebox with dividers works great

[franciscohunter]

Thanks 🙏 brother for showing us your knowledge.

[briandavis]

Word of advice, if your going to preface a video with "if you want to see how to do 'etc' then watch my other video", then put a link to that video in the description. Other than that good job buddy.

[dariomendoza]

Excellent VIDEO THanks for Sharing1!!!!

[Robswag]

Great video, thinking of doing mine 2000 454. what would you charge to do both sides? Trying to see how much I'd save.

[davidworley]

Awesome. I think I have a broken lifter in my Vortek 5.7 L. Wonder what it’d cost me to pay somebody to fix it? I could get at it with your vid, but I think you have some experience I don’t that’d get me in trouble.

[ralphmitchell]

That push rod at 5:26 sounds like an ice cream truck.

[teamdanados]

I bought a stage 3 camshaft kit for a SBC 5.7 vortec engine, the kit came with the camschaft lifters, gear and timing chain, I put the stage 3 cam, the gear and the timing chain, but I did not put the new lifters that came I put the stock ones in the kit, now when I drive my truck it doesn't take off, I press the throttle and it almost doesn't run, the engine sounds as if I hadn't put anything on it, my question is the following: does the engine of my truck work? So why didn't I put the new lifters on it?

[joedirt]

So bump the engine to see the instake go up down for each one?

[harryjones]

I do that when it's together, when one valve is open, adjust the other