3D Mechanical Wooden Puzzle Model | Ugears Tractor - Assembly Video | STEM Projects for Kids

preview_player
Показать описание
Self-assembled Educational Puzzle, no glue needed

Ugears Mechanical Puzzle Assembly DIY Kit - Tractor
Model size: 7.9*3.4*5.4 IN (20*9*14 CM)
Package size: 14.6*6.7*1.2 IN (37*17*3 CM)
Number of components: 97
Model Barcode: 4820184120181
Model Weight: 485 Gms
Estimated time for assembly: 2-3 hours

Tractor from UGEARS is a rattling greeting from the past century. No electronics, just plywood, rubber band motor and tons of fun! The motor has a transmission switch that provides three options: “park”, “drive” and “sport”.

The “Drive” mode will get it going slowly, covering about 5 cm per second. Switch the model to “sport” to see your Tractor speeding up ahead!

• The model is operated using a rubber band motor – no need for an electric power source. Hand tools or glue isn’t required either!
• Engine works rhythmically and you can see the pistons moving.
• Transmission switch in the form a small gear lever offers triple control modes – Park, Drive, and Sport. The Drive mode has a speed of 5cm per second, while the Sport feature makes the Tractor run quite fast. Spin the big wheel during Park mode to get started.
• Maximum speed that it can cover is around 80cm at a leisurely pace.
• Observe the exceptional detailing – one glance at the all wheel drive and you can get a fair idea about the workmanship.
• Step-by-step instruction manual is provided – just refer to the booklet, remove the ready-made parts from the board and begin assembling.
• All parts are manufactured with premium grade plywood, and thus resistant to corrosive deposits and rust.
• Lastly, you can showcase your creation by displaying it on a shelf or on top of a cabinet in your dining area or living room.

If you are worried about your child spending hours in front of the TV or playing video games, gift them with the Tractor mechanical model kit – rest assured they will be hooked! Thus their free time will be spent engaging in a constructive activity that subtly encourages mental prowess in kids.

Рекомендации по теме
Комментарии
Автор

Tip: when you see that a toothpick pulls out of a hole (so that it comes out more than one side, while rolling) stick a small piece of ctp of about 2mm² with white glue, on the side where He goes out. If the rear wheel toothpick, for example, loosens too often, make one with two halves that will measure a little longer than 65mm. Do not be discouraged -)

choopinyoo