SureStep Stepper Motors How to Select & Use a Stepper Motor Part 1 from AutomationDirect

Need help choosing a stepper motor? Learn how to select the right stepper motor for your application. Part I is the basics, Part II is how to calculate torque and inertia and use that to select a motor. Part III looks at real world examples and shows why calculations don't always match real world results.

**Please check our website for our most up-to-date product pricing and availability.

[mun]

BRO THIS IS GREAT! THIS HELPED ME GREATLY IN MY ENGINEERING DESIGN PROJECT FOR COLLEGE!

[jaredgray]

Thanks for the video. Very straight forward, well done. I vote for the metric system though

[asiannvasion]

Thanks for this really helpful video. At 2:42 you said the Productivity2000 controller gives out 500, 000-1, 000, 000 pulses/sec. I can't find this information in their hardware specification anywhere. How can I find out the number of pulses my controller gives out???

[DoubleRhonRhon]

Hi, great explanation,
but at 4:47 where do the 0.25 and 1.25 seconds come from ?
and if we have a 5 seconds duration instead of 1.5sec, how do we know how much triangles we have in the area ?

[Bisofication]

Very informative video!
Is there a way to have Accel/Decel control just like in the video with a p1000 PLC and a P1-04PWM Card while maintaining the desired amount of pulses?
Regards,
Basel

[misturaambar]

Hi. I allready have a cnc machine with parallel port that I want to upgrade. I was planing on installing a MASSO controller but I don´t know which stepper motor X, Y, Z and Spindle drivers to buy . The stepper motors are Sanyo Denki, Step-Syn :Type:103-770-6 . DC=5.1V . 1.0A. 1.8 DEG/Step. spindle motor 100 Watts 500 : 15000 rpm.

[abhinavnair]

Could anyone tell me where can I get those graphs to compare the speed?

[KingLove]

Hi there, thanks so much for sharing this helpful video, I'm little confused at the step dividing the isosceles trapezoid into 10 pieces, why is that not 12 or 14 cuz the speed would be different if we separate it into another number of pieces? Please help me out, thank you so much.

[undiscover]

Pleasa I need your hlep I have cnc X part =70kg. And part of Y=150kg. How match toirque of motor do I need thanks

[TheKlickitat]

Great video with one thing missing. You seem to arbitrarily move the rpm of the motor up to account for acceleration and deceleration. Can you explain how to move the line and to where. I am a little confused as to how you picked that new hight.

[donaldhollingsworth]

what is the best drive a stepper or servo mortor?

[abhinavnair]

Are drives and controller different? If so, could someone explain it briefly?

[arielchavarriaalarcon]

where can i find the manual u use to make this video? can't find it on your website.

[abdelrahmansaad]

please i need the reference which you used

[anotherworld]

please make same type of video in rack and pinion!

[puttavenugopal]

how to select stepper motor for rack and pinion

[madeshm]

how do you consider that 30, 000 pulses are sufficient??

[ndrsg]

Appendix C example 2 = (45 mm ÷ (10 mm/revscrew ÷ 1 revmotor/revscrew)) x 1000 steps/revmotor
= 4500 pulses.... why did you multiply the distance to be traveled by the rest?

[maheshbdalwadi]

Pl help me design a '1person chair lift' to elevate and ground 100 kg. between ground &1st floor (10 ft. height), using a stepper motor. supply 230v 50Hz.

[maheshbdalwadi]

Pl help me design a '1person chair lift' to elevate and ground 100 kg. between 1st &ground floor (10 ft. height), using a stepper motor. supply 230v 50Hz.